NanoVNA v2 Vector Network Analyzer Metal Enclosure 2.8" inch Touchscreen with 1950mAh 50KHz -3.5GHz Measuring S Parameters, SWR, Phase, Delay, Smith Chart (S-A-A-2) Antenna Spectrum Analyzer


NanoVNA v2 Vector Network Analyzer Metal Enclosure 2.8
NanoVNA v2 Vector Network Analyzer Metal Enclosure 2.8" inch Touchscreen with 1950mAh 50KHz -3.5GHz Measuring S Parameters, SWR, Phase, Delay, Smith Chart (S-A-A-2) Antenna Spectrum Analyzer
Features
  • ✔➸ Sweep rate: 80-100 points/s, Maximum sweep points (on device): 201, Maximum sweep points (USB): 1024, Port 2 return loss (1.5GHz): 20dB typ, Port 2 return loss (3GHz): 13dB min.
  • ✔➸ The S-A-A-2/NanoVNA_V2 uses a similar user interface to the NanoVNA, but with a different technical architecture, It has more superior frequency than other nanovna, Frequency range: 50kHz - 3GHz, System dynamic range (calibrated): 70dB (up to 1.5GHz), 60dB (up to 3GHz), S11 noise floor (calibrated): -50dB (up to 1.5GHz), -40dB (up to 3GHz)
  • ✔➸ This VNA V2 Built in 1950mAh battery, Package include Micro USB data cable x1, 30cm SMA male to male SS405 RF cable x2, SMA male calibration kit - OPEN x1,SMA male calibration kit - SHORT x1,SMA male calibration kit - LOAD x1,SMA female to female connector x1
  • ✔➸ NanoVNA V2 is a low cost 3GHz T/R vector network analyzer, designed in collaboration with OwOComm. The V2 hardware is a new from-scratch design and is not based on the original NanoVNA by edy555. Compared to the original NanoVNA, V2 does not use harmonics for measurements and achieves higher dynamic range.
  • .

    .